
This product kit includes (1) 16oz Culture Cast Casting Resin Part A and (1) 16oz Part B Hardener.
Culture Cast is a ultra clear, VOC free casting resin. It is great for preserving flowers and other items in resin, is great for deep molds. Culture Cast is a softer resin and may remain flexible after curing if your pour isn’t deep enough.
Cures to the touch in 24 hours, complete cure in 7 days.
Product Description:Culture Cast is designed specifically for casting artists. Resin will produce a crystal-clear cast in 24 hours. Max casting depth is 1-1/2’’-2’’ Please note: Culture Cast is a softer resin, and even after cure it will remain flexible. If you require a harder resin, please try HARD CAST.
MINIMUM MIXTURE REQUIREMENTS:
* Recommended to mix NO LESS than 2 oz of resin together to avoid sticky, soft or uncured resin.
Surface Preparation: All areas must be dry and dust free and clean before pouring casting resin.
Application and Mixing Instructions: Your work and resin must be between 75-85°F (24-29°C). Humidity must be under 60%.
Thoroughly mix equal parts of Resin Part A with Hardener Part B in a clean, dust free container with a wooden paint stir stick. Stir for 3-4 minutes, continually scraping the sides and bottom of the mixing container as well as the stir stick. Transfer entire contents into a second container and mix for an additional 1-2 minutes. Pour slowly into your cast. Culture Cast can be poured 1-1/2”-2’’ thick depending on temperature. For best curing results, room temperature should be between 75-85°F (24-29°C). Cured to the touch in 24 hours, complete cure in 7 days